You are here

Option Ordering Guide

Printer-friendly versionSend by emailPDF version

 

 

Ballast Manufacturer Backup Mounting Lamps
NOS = No Specification 1B = 1 Lamp PMJB = Pendant Mount 841 = 841 Lamp (no spec)
PRS = Program Start 2B = 2 Lamp GY05 = Gripple Y Toggle 5' 850 = 850 Lamp (no spec)
GPL = GE Pro Line XX = N/A GY10 = Gripple Toggle10' S41 = Sylvania 841 Lamp
QTP = Sylvania QTP   GY15 = Gripple Toggle15' S50 = Sylvania 850 Lamp
ICN = Advance ICN   GL05 = Gripple Looped 5' G41 = GE 841 Lamp
GUM = GE Ultra Max   GL10 = Gripple Looped10' G50 = GE 850 Lamp
QHE = Sylvania QHE   GL15 = Gripple Looped15' P41 = Phillips 841 Lamp
IOP = Advance IOP   HBYH = HANGER P50 = Phillips 850 Lamp
XXX = No Ballast   XXX = N/A XXX = N/A

 

Sensor % Lens Wire Guard Cord
SN1 = Standard (180°) 1 = 100 AL = Prismatic DWG = Drop C06 = Cord 6'
SN3 = Standard (360°) 2 = 25 CL = Clear FWG = Flat C10 = Cord 10'
SC1 = Cold (180°) 3 = 33 PL = Polycarb WWG = Wrap C15 = Cord 15'
SC3 = Cold (360°) 5 = 50 XX = N/A XXX = N/A XXX = N/A
SPC = Photo cell 7 = 75 FR = Frosted    
XXX = N/A        
     IE: SN11, SC35        

 

Plug  
P061 = Cord 06' 120V Plug
  • All Custom Part Numbers that are not specified above should be added to the end.
  • All Standard Cord is 15 AMP. Specify at end of part number if 20 AMP is needed.
  • Only include lamps if lamps are to be installed. Otherwise, quote separately.
  • Use this order every time.

 

Examples:

  • 0HB-06B04-EAH-GUM-1B-GY10-G41-SN11-AL-WWG-C06P061 (If plug is needed, do not separate with a dash.)
  • 0HB-06B04-EAH-GUM-XX-GY15-G41-XX-XXX-C06 (Use “XXXX” if N/A.)
P101 = Cord 10' 120V Plug
P151 = Cord 15' 120V Plug
P062 = Cord 06' 277V Plug
P102 = Cord 10' 277V  Plug
P152 = Cord 15' 277V  Plug
XXXX = LEAVE BLANK