Strip Retrofit Kits
Thank you for your patience as we are in the process of updating all of our product names and codes. You may find that your invoice displays a modified product name/code, differentiating from our cutsheet. We apologize for any inconvenience. Customer service (800-537-1629 ext. 127) or your regional sales manager will be glad to answer any questions you may have regarding your order.
Manufactured Units - Physical Properties, Components/Accessories, Performance
| Graphic | Product | Description | Spec Sheet |
 |
KSH
|
Strip High Profile Reflector kit with brackets. |
Spec Sheet |
 |
KSL
|
Strip Low Profile Reflector kit with brackets. |
Spec Sheet |
 |
KSS
|
Strip Slim Profile Reflector kit with brackets. |
Spec Sheet |
 |
KSM
|
Strip Low Profile Reflector kit with brackets. For 3-lamp 4’ or 6-lamp 8’. | Spec Sheet |
 |
KSW
|
Strip to Wrap conversion kit with brackets. |
Spec Sheet |
System Description - Basic Use and Limitations
The
strip reflector kits are
designed to convert standard two lamp T-12 strip fixtures to highly efficient one or two
lamp T-8 fixtures. The KSH configuration provides optimum performance with heights between
12 feet and 20 feet. The KSL and KSS configurations provide optimum performance with
heights between 8 feet and 12 feet. Reflector kits include reflector, fasteners,
brackets and tekscrews. Socketed kit additionally include jumpered sockets
(standard) or non-jumpered sockets (please specify non-jumpered). Jumpered (shunted)
sockets are required for instant start ballast. Rapid start ballast require
non-jumpered or non-shunted sockets. Channel widths other than standard must be identified
in the part number (see order guide section of specifications)
Conversion maximizes fixture efficiency, and provides uniform light distribution. The
reflector can be easily removed for maintenance without tools. Kit contains reflector,
mounting brackets and fasteners.
Installation of the retrofit kit is simple and easy, requiring only basic hand tools. The
process involves removing the existing lamps and sockets and then installing the new
brackets and sockets. The reflector is then easily attached to the brackets with quarter
turn fasteners. The reflector will serve as the ballast cover. Universal end brackets as
shown can be used with either one or two lamp conversions. The center bracket on 2-lamp
and 4-lamp 8’ conversions has knockouts for two or four locking sockets only.
References
Fixtures are Underwriters
Laboratories Inc. listed.
Energy saving and electronic Class P, CMB/ETL certified HPF ballast comply with Federal
Energy Efficiency Standards.
Warranty
US Energy Sciences, Inc.
warrants to the original Purchaser/End-user that the US Energy Sciences, Inc. reflector
shall be free from defects in material and construction for a period of one (1) year from
the date of purchase. U.S. Energy Sciences, Inc. further warrants, for a period of
twenty-five (25) years from the date of purchase for Specular Aluminum Reflectors,
Specular Bright Aluminum Reflectors, Enhanced Aluminum Reflectors and Laminated Silver
Film Reflectors, that the reflector will not fade, peel, blister, discolor, delaminate or
develop any significant surface deterioration that may reduce source image reflectance due
to exposure to fluorescent lamp radiation and heat up to one hundred degrees Centigrade
(100° C). The Warranty shall not apply to damage resulting from alteration, misuse,
neglect, unauthorized repair, improper cleaning, fire, accident, abuse, negligence, or
corrosive airborne agents such as strong chemicals, bases or acids. Nor does this warranty
apply to the protective films if product is stored for more than three (3) months after
the date of purchase (protective film must be removed from reflectors intended for storage
for more than three (3) months). Furthermore, no warranty is made that the reflector is
saleable or fit for any application or warranty not described herein. US Energy
Sciences, Inc. shall not be liable for any damages (incidental or consequential, or
otherwise) arising from the product defects. Additionally, US Energy Sciences reserves
the right to inspect said product within 7 days of claim for defect before remedy of said
claim.
Contact the manufacturer for limitations to this warranty and claims procedures.
